1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
#include <serial.h>
#include "../bindings.h"
#define PORT 0x3F8
// initialize the specified COM port for serial
// see https://wiki.osdev.org/Serial_Ports
// and https://en.wikibooks.org/wiki/Serial_Programming/8250_UART_Programming
int serial_init(void) {
outb(PORT + 1, 0x00); // disable interrupts
outb(PORT + 3, 0x80); // enable DLAB (divisor latch access bit)
outb(PORT + 0, 0x03); // (lo) Set baud divisor to 3 38400 baud
outb(PORT + 1, 0x00); // (hi)
outb(PORT + 3, 0x03); // disable DLAB, set 8 bits per word, one stop bit, no parity
outb(PORT + 2, 0xC7); // enable and clear FIFOs, set to maximum threshold
// outb(port + 4, 0x0B); // TODO copied this from osdev wiki but i don't think you need it here
outb(PORT + 4, 0x1E); // set in loopback mode for test
outb(PORT + 0, 0xAE); // test by sending 0xAE
uint8_t response = inb(PORT + 0);
if (response != 0xAE) {
// TODO panic here?
return -1;
}
// disable loopback, enable IRQs
outb(PORT + 4, 0x0F);
return 0;
}
uint8_t serial_in(void) {
// wait for data to be available
while ((inb(PORT + 5) & 0x01) == 0);
return inb(PORT);
}
void serial_out(uint8_t ch) {
// wait for output to be free
while ((inb(PORT + 5) & 0x20) == 0);
outb(PORT, ch);
}
void serial_out_str(const char *str) {
for (; *str != '\0'; str++) {
serial_out(*str);
}
}
|
