1 files changed, 108 insertions, 0 deletions
diff --git a/inet2.initd b/inet2.initd
new file mode 100755
index 0000000..7824bdc
--- /dev/null
+++ b/inet2.initd
@@ -0,0 +1,108 @@
+#!/sbin/openrc-run
+name="inet2"
+description="Sets up wireguard interfaces connected via the host's internet connection"
+
+extra_started_commands="reloadwg"
+
+run() {
+  printf '$ \x1b[32;1m%s\x1b[0m\n' "$*"
+  "$@"
+}
+step() {
+  printf '\x1b[34;1m>> %s\x1b[0m\n' "$*"
+}
+
+getval() {
+  /usr/local/bin/config.awk /run/inet2/inet2.conf "$@"
+}
+
+runscripts() {
+  if [ -n "$(getval "interface $2" "$1")" ]; then
+    step "Running $1 for $2"
+    getval "interface $2" "$1" | while read -r line; do
+      (eval "$line")
+    done
+  fi
+}
+
+start() {
+  rm -rf /run/inet2/config 2>/dev/null
+  rm -rf /run/inet2/wg 2>/dev/null
+  cp /config/inet2.conf /run/inet2/inet2.conf
+  mkdir /run/inet2/wg
+  
+  getval Loopback | while read -r addr; do
+    run ip addr add "$addr" dev lo
+  done
+  
+  getval interface | while read -r inter; do
+    step "Generating config for $inter"
+    run mkwgconfig.sh "$inter" /run/inet2/wg/"$inter"
+    
+    # create the wireguard interface *in the default namespace*
+    step "Adding Wireguard interface $inter"
+    run ip link add name "$inter" type wireguard
+    
+    # set up the new network from the config
+    step "Setting Wireguard config for $inter"
+    run wg setconf "$inter" /run/inet2/wg/"$inter"
+    
+    # the config doesn't actually add any addresses, do that here
+    step "Adding host addresses for $inter"
+    getval "interface $inter" Address | while read -r addr; do
+      run ip addr add "$addr" dev "$inter"
+    done
+    
+    runscripts PreUp "$inter"
+    
+    step "Bringing interface up"
+    run ip link set dev "$inter" up
+    
+    getval "interface $inter" Route | while read -r line; do
+      read -r route via addr2 < <(printf "%s" "$line")
+      if [ "$via" = "via" ]; then
+        run ip route add "$route" via "$addr2" dev "$inter"
+      else
+        run ip route add "$route" dev "$inter"
+      fi
+    done
+
+    runscripts PostUp "$inter"
+  done
+  step "Done!"
+}
+
+stop() {
+  if [ -f /run/inet2/inet2.conf ]; then
+    getval Loopback | while read -r addr; do
+      run ip addr del "$addr" dev lo
+    done
+    
+    getval interface | while read -r inter; do
+      runscripts PreDown "$inter"
+      
+      step "Bringing $inter down"
+      run ip link del "$inter"
+      
+      runscripts PostDown "$inter"
+    done
+    
+    rm -rf /run/inet2/inet2.conf
+  fi
+}
+
+# just reloads the wireguard configs for existing interfaces
+# for if a peer's domain name resolves to a different ip address now
+# and it needs to be re-resolved without taking down the connection
+reloadwg() {
+  if [ -f /run/inet2/inet2.conf ]; then
+    getval interface | while read -r inter; do
+      step "Generating config for $inter"
+      run mkwgconfig.sh "$inter" /run/inet2/wg/"$inter" /config/inet2.conf
+      
+      step "Setting Wireguard config for $inter"
+      run wg setconf "$inter" /run/inet2/wg/"$inter"
+    done
+  fi
+}
+