freyanet

this container allows perring multiple servers togeather with ospf creating an internetwork on any subnet

running

docker run --privileged --network host -v $PWD/config:/config g.freya.cat/freya/freyanet

or with docker-compose:

version: "3"
services:
  inet2:
	image: g.freya.cat/freya/freyanet
	network_mode: host # needed otherwise internal network wont be accessable
	privileged: true
	volumes:
	  - ./config:/config

config

create a file at /config/inet2.conf

# specify router id
RouterID 10.1.1.1

# specify routed subnets
Subnet 10.0.0.0/8
Subnet fd:cafe::/48

# optional global private key gets used for all interfaces
PrivateKey = {host private key}

interface interfacename
	# indentation is a single tab per level

	# set the address(es) to assign to the interface
	# route lines are usually the same as Address but with host bits zeroed
	Address 10.2.255.1/30 
	Route 10.2.255.0/30	 # must specify route
	# you can also set ipv6 
	Address fd:cafe::ffff/64
	Address fd:cafe::/64
	# link local is also possible (and prefered for peering routers)
	# link-local addresses should *not* have an associated Route line
	Address fe80::1/64
	Route 1.1.1.0/24
	# more syntax options
	Route 1.1.2.0/24 via 1.1.1.2
	Route default via 1.1.1.3
	# optional: set Gateway and Gateway6 to configure a default gateway
	# through this interface
	Gateway 1.1.1.2
	Gateway6 fe80::1111:1111:1111:1111
	# port to listen on in the host's network namespace, over udp
	# you probably have to allow this through your firewall
	ListenPort {host port}
	# omit if using global private key
	PrivateKey {host private key}
	# all optional
	PreUp command
	PostUp command
	PreDown command
	PostDown command
	
	# if running ospf on this interface
	OSPF
	# if running ospf on this interface and it's a stub network (no other routers)
	OSPF stub
	
	peer peername
		PublicKey {peer public key}
		# if the peer is a router, it has to have AllowedIPs set to everything and be the only
		# peer on the interface
		AllowedIPs 0.0.0.0/0, ::/0
		# either:
		Domain = {domain name of peer}
		Port = {peer port}
		# or:
		Endpoint = {peer ip}:{peer port}
		# make domain enpoint resolve with ipv (ipv6 is default)
		IPv4
		
		# optional
		PersistentKeepalive = 25

# optionally assign static addresses to the loopback interface
# this has its uses for making things ibgp not dependent on a specific interface being up
Loopback 1.2.3.4

and other optional files:

/config/setup.sh gets run on the first run of the container with the host's networking
/config/start.sh gets run every time the container starts up with the host's networking

Licenses

License	Author	Project
MIT	tint	inet2
MIT	freya	freyanet

2.8 KiB Raw Blame History

freyanet

running

config

Licenses

2.8 KiB

Raw Blame History