blob: ac75a64bef27f58cfed2e7b0338e1a1cd4fe4a0a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
/**
** SCCS ID: @(#)support.h 2.3 1/22/25
**
** @file support.h
**
** @author K. Reek
** @author Warren R. Carithers
**
** Declarations for functions provided in support.c, and
** some hardware characteristics needed in the initialization.
**
*/
#ifndef SUPPORT_H
#define SUPPORT_H
/*
** Delay values
**
** Notes: The parameter to the delay() function is ambiguous; it
** purports to indicate a delay length, but that isn't really tied
** to any real-world time measurement.
**
** On the original systems we used (dual 500MHz Intel P3 CPUs), each
** "unit" was approximately one tenth of a second, so delay(10) would
** delay for about one second.
**
** On the current machines (Intel Core i5-7500), delay(100) is about
** 2.5 seconds, so each "unit" is roughly 0.025 seconds.
**
** Ultimately, just remember that THESE VALUES ARE APPROXIMATE AT BEST.
*/
#define DELAY_1_SEC 40
#define DELAY_1_25_SEC 50
#define DELAY_2_SEC 80
#define DELAY_2_5_SEC 100
#define DELAY_3_SEC 120
#define DELAY_5_SEC 200
#define DELAY_7_SEC 280
#define DELAY_10_SEC 400
#ifndef ASM_SRC
/**
** panic
**
** Called when we find an unrecoverable error, this routine disables
** interrupts, prints a description of the error and then goes into a
** hard loop to prevent any further processing.
**
** @param reason NUL-terminated message to be printed.
*/
void panic(char *reason);
/**
** init_interrupts
**
** (Re)initilizes the interrupt system. This includes initializing the
** IDT and the PIC. It is up to the user to enable processor interrupts
** when they're ready.
*/
void init_interrupts(void);
/*
** install_isr
**
** Installs a second-level handler for a specific interrupt. Returns the
** previously-installed handler for reinstallation (if desired).
**
** @param vector the interrupt vector number
** @param handler the second-stage ISR function to be called by the stub
**
** @return a pointer to the previously-registered ISR
*/
void (*install_isr(int vector, void (*handler)(int, int)))(int, int);
/*
** Name: delay
**
** See the comment above about the relative accuracy of the 'length'
** parameter.
*/
void delay(int length);
#endif /* !ASM_SRC */
#endif
|
