1 files changed, 0 insertions, 443 deletions
diff --git a/kernel/old/include/x86/ops.h b/kernel/old/include/x86/ops.h
deleted file mode 100644
index ad795b9..0000000
--- a/kernel/old/include/x86/ops.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/**
-** @file	ops.h
-**
-** @author	Warren R. Carithers
-**
-** @brief	Inline escapes to assembly for efficiency
-**
-** Inspiration from:
-**	Martins Mozeiko, https://gist.github.com/mmozeiko/f68ad2546bd6ab953315
-**  MIT's xv6,       https://github.com/mit-pdos/xv6-public
-**
-** Note: normally, GCC doesn't inline unless the optimization level is
-** over 1. This can be forced by adding 
-**
-**      __attribute__((always_inline))
-**
-** after the parameter list on each declaration. This is enabled by
-** defining the compile-time CPP symbol FORCE_INLINING.
-*/
-
-#ifndef OPS_H_
-#define OPS_H_
-
-#include <common.h>
-
-#ifndef ASM_SRC
-
-// control "forced" inlining
-#ifdef FORCE_INLINING
-#define OPSINLINED    __attribute__((always_inline))
-#else
-#define OPSINLINED    /* no-op */
-#endif  /* FORCE_INLINING */
-
-/****************************
-** Data movement
-****************************/
-
-/**
-** Block move functions
-**
-** Variations:  movsb(), movsl(), movsq()
-**
-** Description:  Copy from source buffer to destination buffer
-**
-** @param dst  Destination buffer
-** @param src  Source buffer
-** @param len  Byte count
-*/
-static inline void
-movsb( void* dst, const void* src, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep movsb"
-			: "+D"(dst), "+S"(src), "+c"(len)
-			: : "memory" );
-}
-
-static inline void
-movsw( void* dst, const void* src, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep movsw"
-			: "+D"(dst), "+S"(src), "+c"(len)
-			: : "memory" );
-}
-
-static inline void
-movsl( void* dst, const void* src, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep movsl"
-			: "+D"(dst), "+S"(src), "+c"(len)
-			: : "memory" );
-}
-
-static inline void
-movsq( void* dst, const void* src, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep movsq"
-			: "+D"(dst), "+S"(src), "+c"(len)
-			: : "memory" );
-}
-
-/**
-** Block store functions
-**
-** Variations:  stosb(), stosw(), stosl()
-**
-** Description:  Store a specific value into destination buffer
-**
-** @param dst  Destination buffer
-** @param val  Data to copy
-** @param len  Byte count
-*/
-static inline void
-stosb( void *dst, uint8_t val, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep stosb"
-			: "=D" (dst), "=c" (len)
-			: "0" (dst), "1" (len), "a" (val)
-			: "memory", "cc" );
-}
-
-static inline void
-stosw( void *dst, uint16_t val, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep stos2"
-			: "=D" (dst), "=c" (len)
-			: "0" (dst), "1" (len), "a" (val)
-			: "memory", "cc" );
-}
-
-static inline void
-stosl( void *dst, uint32_t val, uint32_t len ) OPSINLINED
-{
-	__asm__ __volatile__( "cld; rep stosl"
-			: "=D" (dst), "=c" (len)
-			: "0" (dst), "1" (len), "a" (val)
-			: "memory", "cc" );
-}
-
-/****************************
-** Special register access
-****************************/
-
-/**
-** Register read functions
-**
-** Variations:  r_cr0(), r_cr2(), r_cr3(), r_cr4(), r_eflags(),
-**              r_ebp(), r_esp()
-**
-** Description:  Reads the register indicated by its name
-**
-** @return Contents of the register
-*/
-static inline uint32_t
-r_cr0( void ) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%cr0,%0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_cr2( void ) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%cr2,%0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_cr3( void ) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%cr3,%0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_cr4( void ) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%cr4,%0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_eflags(void) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "pushfl; popl %0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_ebp(void) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%ebp,%0" : "=r" (val) );
-	return val;
-}
-
-static inline uint32_t
-r_esp(void) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl %%esp,%0" : "=r" (val) );
-	return val;
-}
-
-/**
-** Register write functions
-**
-** Variations:  w_cr0(), w_cr2(), w_cr3(), w_cr4(), w_eflags()
-**
-** Description:  Writes a value into the CR indicated by its name
-*/
-static inline void
-w_cr0( uint32_t val ) OPSINLINED
-{
-	__asm__ __volatile__( "movl %0,%%cr0" : : "r" (val) );
-}
-
-static inline void
-w_cr2( uint32_t val ) OPSINLINED
-{
-	__asm__ __volatile__( "movl %0,%%cr2" : : "r" (val) );
-}
-
-static inline void
-w_cr3( uint32_t val ) OPSINLINED
-{
-	__asm__ __volatile__( "movl %0,%%cr3" : : "r" (val) );
-}
-
-static inline void
-w_cr4( uint32_t val ) OPSINLINED
-{
-	__asm__ __volatile__( "movl %0,%%cr4" : : "r" (val) );
-}
-
-static inline void
-w_eflags(uint32_t eflags) OPSINLINED
-{
-	__asm__ __volatile__( "pushl %0; popfl" : : "r" (eflags) );
-}
-
-/**
-** Descriptor table load functions
-**
-** Variations:  w_gdt(), w_idt()
-**
-** Description:  Load an address into the specified processor register
-**
-** @param addr  The value to be loaded into the register
-*/
-static inline void
-w_gdt( void *addr ) OPSINLINED
-{
-	__asm__ __volatile__( "lgdt (%0)" : : "r" (addr) );
-}
-
-static inline void
-w_idt( void *addr ) OPSINLINED
-{
-	__asm__ __volatile__( "lidt (%0)" : : "r" (addr) );
-}
-
-/**
-** CPU ID access
-**
-** Description:  Retrieve CPUID information
-**
-** @param op  Value to be placed into %eax for the operation
-** @param ap   Pointer to where %eax contents should be saved, or NULL
-** @param bp   Pointer to where %ebx contents should be saved, or NULL
-** @param cp   Pointer to where %ecx contents should be saved, or NULL
-** @param dp   Pointer to where %edx contents should be saved, or NULL
-*/
-static inline void
-cpuid( uint32_t op, uint32_t *ap, uint32_t *bp,
-		uint32_t *cp, uint32_t *dp ) OPSINLINED
-{
-	uint32_t eax, ebx, ecx, edx;
-	__asm__ __volatile__( "cpuid"
-			: "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
-			: "a" (op) );
-
-	if( ap ) *ap = eax;
-	if( bp ) *bp = ebx;
-	if( cp ) *cp = ecx;
-	if( dp ) *dp = edx;
-}
-
-/****************************
-** TLB management
-****************************/
-
-/**
-** TLB invalidation for one page
-**
-** Description:  Invalidate the TLB entry for an address
-**
-** @param addr  An address within the page to be flushed
-*/
-static inline void
-invlpg( uint32_t addr ) OPSINLINED
-{
-	__asm__ __volatile__( "invlpg (%0)" : : "r" (addr) : "memory" );
-}
-
-/**
-** TLB invalidation for all pages
-**
-** Description:  Flush all entries from the TLB
-**
-** We do this by changing CR3.
-*/
-static inline void
-flushtlb( void ) OPSINLINED
-{
-	uint32_t cr3;
-	__asm__ __volatile__( "movl %%cr3,%0" : "=r" (cr3) );
-	__asm__ __volatile__( "movl %0,%%cr2" : : "r" (cr3) );
-}
-
-/****************************
-** I/O instructions
-****************************/
-
-/**
-** Name:	inN
-**
-** Variations:  inb(), inw(), inl()
-**
-** Description:  Read some amount of data from the supplied I/O port
-**
-** @param port  The i/o port to read from
-**
-** @return The data read from the specified port
-*/
-static inline uint8_t
-inb( int port ) OPSINLINED
-{
-	uint8_t data;
-	__asm__ __volatile__( "inb %w1,%0" : "=a" (data) : "d" (port) );
-	return data;
-}
-
-static inline uint16_t
-inw( int port ) OPSINLINED
-{
-	uint16_t data;
-	__asm__ __volatile__( "inw %w1,%0" : "=a" (data) : "d" (port) );
-	return data;
-}
-
-static inline uint32_t
-inl( int port ) OPSINLINED
-{
-	uint32_t data;
-	__asm__ __volatile__( "inl %w1,%0" : "=a" (data) : "d" (port) );
-	return data;
-}
-
-/**
-** Name:	outN
-**
-** Variations:  outb(), outw(), outl()
-**
-** Description:  Write some data to the specified I/O port
-**
-** @param port  The i/o port to write to
-** @param data  The data to be written to the port
-**
-** @return The data read from the specified port
-*/
-static inline void
-outb( int port, uint8_t data ) OPSINLINED
-{
-	__asm__ __volatile__( "outb %0,%w1" : : "a" (data), "d" (port) );
-}
-
-static inline void
-outw( int port, uint16_t data ) OPSINLINED
-{
-	__asm__ __volatile__( "outw %0,%w1" : : "a" (data), "d" (port) );
-}
-
-static inline void
-outl( int port, uint32_t data ) OPSINLINED
-{
-	__asm__ __volatile__( "outl %0,%w1" : : "a" (data), "d" (port) );
-}
-
-/****************************
-** Miscellaneous instructions
-****************************/
-
-/**
-** Name:	breakpoint
-**
-** Description:  Cause a breakpoint interrupt for debugging purposes
-*/
-static inline void
-breakpoint( void ) OPSINLINED
-{
-	__asm__ __volatile__( "int3" );
-}
-
-/**
-** Name:	get_ra
-**
-** Description:  Get the return address for the calling function
-**              (i.e., where whoever called us will go back to)
-**
-** @return The address the calling routine will return to as a uint32_t
-*/
-static inline uint32_t
-get_ra( void ) OPSINLINED
-{
-	uint32_t val;
-	__asm__ __volatile__( "movl 4(%%ebp),%0" : "=r" (val) );
-	return val;
-}
-
-/**
-** Name:	ev_wait
-**
-** Description:  Pause until something happens
-*/
-static inline void
-ev_wait( void ) OPSINLINED
-{
-	__asm__ __volatile__( "sti ; hlt" );
-}
-
-
-/**
-** Name:	xchgl
-**
-** Description:  Perform an atomic exchange with memory
-**
-** @param addr  Memory location to be modified
-** @param data  Data to exchange
-**
-** @return The old contents of the memory location
-*/
-static inline uint32_t
-xchgl( volatile uint32_t *addr, uint32_t data ) OPSINLINED
-{
-	uint32_t old;
-
-	// + indicates a read-modify-write operand
-	__asm__ __volatile__( "lock; xchgl %0, %1"
-		     : "+m" (*addr), "=a" (old)
-		     : "1" (data)
-		     : "cc");
-	return old;
-}
-
-#endif  /* !ASM_SRC */
-
-#endif