diff options
Diffstat (limited to 'include/x86/uart.h')
| -rw-r--r-- | include/x86/uart.h | 370 |
1 files changed, 185 insertions, 185 deletions
diff --git a/include/x86/uart.h b/include/x86/uart.h index 0c6194b..3ec2b8f 100644 --- a/include/x86/uart.h +++ b/include/x86/uart.h @@ -20,7 +20,7 @@ */ #ifndef UART_H -#define UART_H +#define UART_H /********************************************************************* ***************************** I/O PORTS ****************************** @@ -29,14 +29,14 @@ /* ** Base port number assigned to the device */ -#define UA4_COM1_PORT 0x3f8 -#define UA4_COM2_PORT 0x2f8 -#define UA4_COM3_PORT 0x3e8 -#define UA4_COM4_PORT 0x2e8 +#define UA4_COM1_PORT 0x3f8 +#define UA4_COM2_PORT 0x2f8 +#define UA4_COM3_PORT 0x3e8 +#define UA4_COM4_PORT 0x2e8 // short name for the one we'll use -#define UA4_PORT UA4_COM1_PORT -#define UA5_PORT UA4_COM1_PORT +#define UA4_PORT UA4_COM1_PORT +#define UA5_PORT UA4_COM1_PORT /* ** Registers @@ -47,7 +47,7 @@ ** Index Register(s) ** ===== ========================================= ** 0 Receiver Data (RO), Transmitter Data (WO) -** 1 Interrupt Enable +** 1 Interrupt Enable ** 2 Interrupt ID (RO), FIFO Control (WO) ** 3 Line Control, Divisor Latch ** 4 Modem Control @@ -70,153 +70,153 @@ /* ** Receiver Data Register (read-only) */ -#define UA4_RXD (UA4_PORT+0) -# define UA4_RX_DATA UA4_RXD +#define UA4_RXD (UA4_PORT + 0) +#define UA4_RX_DATA UA4_RXD /* ** Transmitter Data Register (write-only) */ -#define UA4_TXD (UA4_PORT+0) -# define UA4_TX_DATA UA4_TXD +#define UA4_TXD (UA4_PORT + 0) +#define UA4_TX_DATA UA4_TXD /* ** Interrupt Enable Register */ -#define UA4_IER (UA4_PORT+1) -# define UA4_INT_ENABLE_REG UA4_IER +#define UA4_IER (UA4_PORT + 1) +#define UA4_INT_ENABLE_REG UA4_IER // fields -#define UA4_IER_RX_IE 0x01 // Rcvr High-Data-Level Int Enable -#define UA4_IER_TX_IE 0x02 // Xmitter Low-data-level Int Enable -#define UA4_IER_LS_IE 0x04 // Line Status Int Enable -#define UA4_IER_MS_IE 0x08 // Modem Status Int Enable +#define UA4_IER_RX_IE 0x01 // Rcvr High-Data-Level Int Enable +#define UA4_IER_TX_IE 0x02 // Xmitter Low-data-level Int Enable +#define UA4_IER_LS_IE 0x04 // Line Status Int Enable +#define UA4_IER_MS_IE 0x08 // Modem Status Int Enable // aliases -#define UA4_IER_RX_INT_ENABLE UA4_IER_RX_IE -#define UA4_IER_TX_INT_ENABLE UA4_IER_TX_IE -#define UA4_IER_LINE_STATUS_INT_ENABLE UA4_IER_LS_IE -#define UA4_IER_MODEM_STATUS_INT_ENABLE UA4_IER_MS_IE +#define UA4_IER_RX_INT_ENABLE UA4_IER_RX_IE +#define UA4_IER_TX_INT_ENABLE UA4_IER_TX_IE +#define UA4_IER_LINE_STATUS_INT_ENABLE UA4_IER_LS_IE +#define UA4_IER_MODEM_STATUS_INT_ENABLE UA4_IER_MS_IE /* ** Interrupt Identification Register (read-only) ** ** a.k.a. Event Identification Register */ -#define UA4_IIR (UA4_PORT+2) -# define UA4_EVENT_ID UA4_IIR +#define UA4_IIR (UA4_PORT + 2) +#define UA4_EVENT_ID UA4_IIR // fields -#define UA4_IIR_IPF 0x01 // Interrupt Pending flag +#define UA4_IIR_IPF 0x01 // Interrupt Pending flag -#define UA4_IIR_IPR_MASK 0x06 // Interrupt Priority mask -# define UA4_IIR_IPR0_MASK 0x02 // IPR bit 0 mask -# define UA4_IIR_IPR1_MASK 0x04 // IPR bit 1 mask +#define UA4_IIR_IPR_MASK 0x06 // Interrupt Priority mask +#define UA4_IIR_IPR0_MASK 0x02 // IPR bit 0 mask +#define UA4_IIR_IPR1_MASK 0x04 // IPR bit 1 mask -#define UA5_IIR_RXFT 0x08 // RX_FIFO Timeout -#define UA5_IIR_FEN0 0x40 // FIFOs Enabled -#define UA5_IIR_FEN1 0x80 // FIFOs Enabled +#define UA5_IIR_RXFT 0x08 // RX_FIFO Timeout +#define UA5_IIR_FEN0 0x40 // FIFOs Enabled +#define UA5_IIR_FEN1 0x80 // FIFOs Enabled // aliases -#define UA4_IIR_INT_PENDING UA4_IIR_IPF -#define UA4_IIR_INT_PRIORITY UA4_IIR_IPR -#define UA5_IIR_RX_FIFO_TIMEOUT UA5_IIR_RXFT -#define UA5_IIR_FIFO_ENABLED_0 UA5_IIR_FEN0 -#define UA5_IIR_FIFO_ENABLED_1 UA5_IIR_FEN1 +#define UA4_IIR_INT_PENDING UA4_IIR_IPF +#define UA4_IIR_INT_PRIORITY UA4_IIR_IPR +#define UA5_IIR_RX_FIFO_TIMEOUT UA5_IIR_RXFT +#define UA5_IIR_FIFO_ENABLED_0 UA5_IIR_FEN0 +#define UA5_IIR_FIFO_ENABLED_1 UA5_IIR_FEN1 // IIR interrupt priorities (four-bit values) -#define UA4_IIR_INT_PRI_MASK 0x0f // Mask for extracting int priority -# define UA4_IIR_NO_INT 0x01 // no interrupt -# define UA4_IIR_LINE_STATUS 0x06 // line status interrupt -# define UA4_IIR_RX 0x04 // Receiver High Data Level -# define UA5_IIR_RX_FIFO 0x0c // Receiver FIFO timeout (16550) -# define UA4_IIR_TX 0x02 // Transmitter Low Data level -# define UA4_IIR_MODEM_STATUS 0x00 // Modem Status +#define UA4_IIR_INT_PRI_MASK 0x0f // Mask for extracting int priority +#define UA4_IIR_NO_INT 0x01 // no interrupt +#define UA4_IIR_LINE_STATUS 0x06 // line status interrupt +#define UA4_IIR_RX 0x04 // Receiver High Data Level +#define UA5_IIR_RX_FIFO 0x0c // Receiver FIFO timeout (16550) +#define UA4_IIR_TX 0x02 // Transmitter Low Data level +#define UA4_IIR_MODEM_STATUS 0x00 // Modem Status // aliases -#define UA4_IIR_NO_INT_PENDING UA4_IIR_NO_INT -#define UA4_IIR_LINE_STATUS_INT_PENDING UA4_IIR_LINE_STATUS -#define UA4_IIR_RX_INT_PENDING UA4_IIR_RX -#define UA5_IIR_RX_FIFO_TIMEOUT_INT_PENDING UA5_IIR_RX_FIFO -#define UA4_IIR_TX_INT_PENDING UA4_IIR_TX -#define UA4_IIR_MODEM_STATUS_INT_PENDING UA4_IIR_MODEM_STATUS +#define UA4_IIR_NO_INT_PENDING UA4_IIR_NO_INT +#define UA4_IIR_LINE_STATUS_INT_PENDING UA4_IIR_LINE_STATUS +#define UA4_IIR_RX_INT_PENDING UA4_IIR_RX +#define UA5_IIR_RX_FIFO_TIMEOUT_INT_PENDING UA5_IIR_RX_FIFO +#define UA4_IIR_TX_INT_PENDING UA4_IIR_TX +#define UA4_IIR_MODEM_STATUS_INT_PENDING UA4_IIR_MODEM_STATUS /* ** FIFO Control Register (16550 only, write-only) */ -#define UA5_FCR (UA5_PORT+2) -# define UA5_FIFO_CTL UA5_FCR +#define UA5_FCR (UA5_PORT + 2) +#define UA5_FIFO_CTL UA5_FCR -#define UA5_FCR_FIFO_RESET 0x00 // Reset the FIFO -#define UA5_FCR_FIFO_EN 0x01 // FIFO Enable -#define UA5_FCR_RXSR 0x02 // Receiver Soft Reset -#define UA5_FCR_TXSR 0x04 // Transmitter Soft Reset +#define UA5_FCR_FIFO_RESET 0x00 // Reset the FIFO +#define UA5_FCR_FIFO_EN 0x01 // FIFO Enable +#define UA5_FCR_RXSR 0x02 // Receiver Soft Reset +#define UA5_FCR_TXSR 0x04 // Transmitter Soft Reset -#define UA5_FCR_TXFT_MASK 0x30 // TX_FIFO threshold level mask -# define UA5_FCR_TXFT0_MASK 0x10 // TXFT bit 0 mask -# define UA5_FCR_TXFT1_MASK 0x20 // TXFT bit 1 mask -# define UA5_FCR_TX_FIFO_1 0x00 // 1 char -# define UA5_FCR_TX_FIFO_3 0x10 // 3 char -# define UA5_FCR_TX_FIFO_9 0x20 // 9 char -# define UA5_FCR_TX_FIFO_13 0x30 // 13 char +#define UA5_FCR_TXFT_MASK 0x30 // TX_FIFO threshold level mask +#define UA5_FCR_TXFT0_MASK 0x10 // TXFT bit 0 mask +#define UA5_FCR_TXFT1_MASK 0x20 // TXFT bit 1 mask +#define UA5_FCR_TX_FIFO_1 0x00 // 1 char +#define UA5_FCR_TX_FIFO_3 0x10 // 3 char +#define UA5_FCR_TX_FIFO_9 0x20 // 9 char +#define UA5_FCR_TX_FIFO_13 0x30 // 13 char -#define UA5_FCR_RXFT_MASK 0xc0 // RX_FIFO threshold level mask -# define UA5_FCR_RXFT0_MASK 0x40 // RXFT bit 0 mask -# define UA5_FCR_RXFT1_MASK 0x80 // RXFT bit 1 mask -# define UA5_FCR_RX_FIFO_1 0x00 // 1 char -# define UA5_FCR_RX_FIFO_4 0x40 // 4 char -# define UA5_FCR_RX_FIFO_8 0x80 // 8 char -# define UA5_FCR_RX_FIFO_14 0xc0 // 14 char +#define UA5_FCR_RXFT_MASK 0xc0 // RX_FIFO threshold level mask +#define UA5_FCR_RXFT0_MASK 0x40 // RXFT bit 0 mask +#define UA5_FCR_RXFT1_MASK 0x80 // RXFT bit 1 mask +#define UA5_FCR_RX_FIFO_1 0x00 // 1 char +#define UA5_FCR_RX_FIFO_4 0x40 // 4 char +#define UA5_FCR_RX_FIFO_8 0x80 // 8 char +#define UA5_FCR_RX_FIFO_14 0xc0 // 14 char // aliases -#define UA5_FCR_FIFO_ENABLED UA5_FCR_FIFO_EN -#define UA5_FCR_RX_SOFT_RESET UA5_FCR_RXSR -#define UA5_FCR_TX_SOFT_RESET UA5_FCR_TXSR -#define UA5_FCR_TX_FIFO_1_CHAR UA5_FCR_TX_FIFO_1 -#define UA5_FCR_TX_FIFO_3_CHAR UA5_FCR_TX_FIFO_3 -#define UA5_FCR_TX_FIFO_9_CHAR UA5_FCR_TX_FIFO_9 -#define UA5_FCR_TX_FIFO_13_CHAR UA5_FCR_TX_FIFO_13 -#define UA5_FCR_RX_FIFO_1_CHAR UA5_FCR_RX_FIFO_1 -#define UA5_FCR_RX_FIFO_4_CHAR UA5_FCR_RX_FIFO_4 -#define UA5_FCR_RX_FIFO_8_CHAR UA5_FCR_RX_FIFO_8 -#define UA5_FCR_RX_FIFO_14_CHAR UA5_FCR_RX_FIFO_14 +#define UA5_FCR_FIFO_ENABLED UA5_FCR_FIFO_EN +#define UA5_FCR_RX_SOFT_RESET UA5_FCR_RXSR +#define UA5_FCR_TX_SOFT_RESET UA5_FCR_TXSR +#define UA5_FCR_TX_FIFO_1_CHAR UA5_FCR_TX_FIFO_1 +#define UA5_FCR_TX_FIFO_3_CHAR UA5_FCR_TX_FIFO_3 +#define UA5_FCR_TX_FIFO_9_CHAR UA5_FCR_TX_FIFO_9 +#define UA5_FCR_TX_FIFO_13_CHAR UA5_FCR_TX_FIFO_13 +#define UA5_FCR_RX_FIFO_1_CHAR UA5_FCR_RX_FIFO_1 +#define UA5_FCR_RX_FIFO_4_CHAR UA5_FCR_RX_FIFO_4 +#define UA5_FCR_RX_FIFO_8_CHAR UA5_FCR_RX_FIFO_8 +#define UA5_FCR_RX_FIFO_14_CHAR UA5_FCR_RX_FIFO_14 /* ** Line Control Register (available in all banks) ** ** Selected when bit 7 of the value written to the port is a 0. */ -#define UA4_LCR (UA4_PORT+3) -# define UA4_LINE_CTL UA4_LCR +#define UA4_LCR (UA4_PORT + 3) +#define UA4_LINE_CTL UA4_LCR -#define UA4_LCR_WLS_MASK 0x03 // Word Length Select mask -# define UA4_LCR_WLS0_MASK 0x01 // WLS bit 0 mask -# define UA4_LCR_WLS1_MASK 0x02 // WLS bit 1 mask -# define UA4_LCR_WLS_5 0x00 // 5 bits per char -# define UA4_LCR_WLS_6 0x01 // 6 bits per char -# define UA4_LCR_WLS_7 0x02 // 7 bits per char -# define UA4_LCR_WLS_8 0x03 // 8 bits per char +#define UA4_LCR_WLS_MASK 0x03 // Word Length Select mask +#define UA4_LCR_WLS0_MASK 0x01 // WLS bit 0 mask +#define UA4_LCR_WLS1_MASK 0x02 // WLS bit 1 mask +#define UA4_LCR_WLS_5 0x00 // 5 bits per char +#define UA4_LCR_WLS_6 0x01 // 6 bits per char +#define UA4_LCR_WLS_7 0x02 // 7 bits per char +#define UA4_LCR_WLS_8 0x03 // 8 bits per char -#define UA4_LCR_STB 0x04 // Stop Bits -# define UA4_LCR_1_STOP_BIT 0x00 -# define UA4_LCR_2_STOP_BIT 0x04 +#define UA4_LCR_STB 0x04 // Stop Bits +#define UA4_LCR_1_STOP_BIT 0x00 +#define UA4_LCR_2_STOP_BIT 0x04 -#define UA4_LCR_PEN 0x08 // Parity Enable -#define UA4_LCR_EPS 0x10 // Even Parity Select -#define UA4_LCR_STKP 0x20 // Sticky Parity -# define UA4_LCR_NO_PARITY 0x00 -# define UA4_LCR_ODD_PARITY UA4_LCR_PEN -# define UA4_LCR_EVEN_PARITY (UA4_LCR_PEN|UA4_LCR_EPS) -# define UA4_LCR_PARITY_LOGIC_1 (UA4_LCR_PEN|UA4_LCR_STKP) -# define UA4_LCR_PARITY_LOGIC_0 (UA4_LCR_PEN|UA4_LCR_EPS|UA4_LCR_STKP) +#define UA4_LCR_PEN 0x08 // Parity Enable +#define UA4_LCR_EPS 0x10 // Even Parity Select +#define UA4_LCR_STKP 0x20 // Sticky Parity +#define UA4_LCR_NO_PARITY 0x00 +#define UA4_LCR_ODD_PARITY UA4_LCR_PEN +#define UA4_LCR_EVEN_PARITY (UA4_LCR_PEN | UA4_LCR_EPS) +#define UA4_LCR_PARITY_LOGIC_1 (UA4_LCR_PEN | UA4_LCR_STKP) +#define UA4_LCR_PARITY_LOGIC_0 (UA4_LCR_PEN | UA4_LCR_EPS | UA4_LCR_STKP) -#define UA4_LCR_SBRK 0x40 // Set Break -#define UA4_LCR_DLAB 0x80 // Divisor Latch select bit +#define UA4_LCR_SBRK 0x40 // Set Break +#define UA4_LCR_DLAB 0x80 // Divisor Latch select bit // aliases -# define UA4_LCR_STOP_BITS UA4_LCR_STB -# define UA4_LCR_PARITY_ENABLE UA4_LCR_PEN -# define UA4_LCR_SET_BREAK UA4_LCR_SBRK -# define UA4_LCR_BANK_SELECT_ENABLE UA4_LCR_BKSE +#define UA4_LCR_STOP_BITS UA4_LCR_STB +#define UA4_LCR_PARITY_ENABLE UA4_LCR_PEN +#define UA4_LCR_SET_BREAK UA4_LCR_SBRK +#define UA4_LCR_BANK_SELECT_ENABLE UA4_LCR_BKSE /* ** Divisor Latch Registers @@ -233,109 +233,109 @@ ** "re-lock" the Divisor Latch registers, write a command byte to ** LCR with 0 in the DLAB bit. */ -#define UA4_DLL (UA4_PORT+0) // Divisor Latch (least sig.) -#define UA4_DLM (UA4_PORT+1) // Divisor Latch (most sig.) +#define UA4_DLL (UA4_PORT + 0) // Divisor Latch (least sig.) +#define UA4_DLM (UA4_PORT + 1) // Divisor Latch (most sig.) // aliases -#define UA4_DIVISOR_LATCH_LS UA4_DLL -#define UA4_DIVISOR_LATCH_MS UA4_DLM +#define UA4_DIVISOR_LATCH_LS UA4_DLL +#define UA4_DIVISOR_LATCH_MS UA4_DLM // Baud rate divisor high and low bytes -#define BAUD_HIGH_BYTE(x) (((x) >> 8) & 0xff) -#define BAUD_LOW_BYTE(x) ((x) & 0xff) +#define BAUD_HIGH_BYTE(x) (((x) >> 8) & 0xff) +#define BAUD_LOW_BYTE(x) ((x) & 0xff) // Baud rate divisors -#define DL_BAUD_50 2304 -#define DL_BAUD_75 1536 -#define DL_BAUD_110 1047 -#define DL_BAUD_150 768 -#define DL_BAUD_300 384 -#define DL_BAUD_600 192 -#define DL_BAUD_1200 96 -#define DL_BAUD_1800 64 -#define DL_BAUD_2000 58 -#define DL_BAUD_2400 48 -#define DL_BAUD_3600 32 -#define DL_BAUD_4800 24 -#define DL_BAUD_7200 16 -#define DL_BAUD_9600 12 -#define DL_BAUD_14400 8 -#define DL_BAUD_19200 6 -#define DL_BAUD_28800 4 -#define DL_BAUD_38400 3 -#define DL_BAUD_57600 2 -#define DL_BAUD_115200 1 +#define DL_BAUD_50 2304 +#define DL_BAUD_75 1536 +#define DL_BAUD_110 1047 +#define DL_BAUD_150 768 +#define DL_BAUD_300 384 +#define DL_BAUD_600 192 +#define DL_BAUD_1200 96 +#define DL_BAUD_1800 64 +#define DL_BAUD_2000 58 +#define DL_BAUD_2400 48 +#define DL_BAUD_3600 32 +#define DL_BAUD_4800 24 +#define DL_BAUD_7200 16 +#define DL_BAUD_9600 12 +#define DL_BAUD_14400 8 +#define DL_BAUD_19200 6 +#define DL_BAUD_28800 4 +#define DL_BAUD_38400 3 +#define DL_BAUD_57600 2 +#define DL_BAUD_115200 1 /* ** Modem Control Register */ -#define UA4_MCR (UA4_PORT+4) -# define UA4_MODEM_CTL UA4_MCR +#define UA4_MCR (UA4_PORT + 4) +#define UA4_MODEM_CTL UA4_MCR -#define UA4_MCR_DTR 0x01 // Data Terminal Ready -#define UA4_MCR_RTS 0x02 // Ready to Send -#define UA4_MCR_RILP 0x04 // Loopback Interrupt Request -#define UA4_MCR_ISEN 0x08 // Interrupt Signal Enable -#define UA4_MCR_DCDLP 0x08 // DCD Loopback -#define UA4_MCR_LOOP 0x10 // Loopback Enable +#define UA4_MCR_DTR 0x01 // Data Terminal Ready +#define UA4_MCR_RTS 0x02 // Ready to Send +#define UA4_MCR_RILP 0x04 // Loopback Interrupt Request +#define UA4_MCR_ISEN 0x08 // Interrupt Signal Enable +#define UA4_MCR_DCDLP 0x08 // DCD Loopback +#define UA4_MCR_LOOP 0x10 // Loopback Enable // aliases -#define UA4_MCR_DATA_TERMINAL_READY UA4_MCR_DTR -#define UA4_MCR_READY_TO_SEND UA4_MCR_RTS -#define UA4_MCR_LOOPBACK_INT_REQ UA4_MCR_RILP -#define UA4_MCR_INT_SIGNAL_ENABLE UA4_MCR_ISEN -#define UA4_MCR_LOOPBACK_DCD UA4_MCR_DCDLP -#define UA4_MCR_LOOPBACK_ENABLE UA4_MCR_LOOP +#define UA4_MCR_DATA_TERMINAL_READY UA4_MCR_DTR +#define UA4_MCR_READY_TO_SEND UA4_MCR_RTS +#define UA4_MCR_LOOPBACK_INT_REQ UA4_MCR_RILP +#define UA4_MCR_INT_SIGNAL_ENABLE UA4_MCR_ISEN +#define UA4_MCR_LOOPBACK_DCD UA4_MCR_DCDLP +#define UA4_MCR_LOOPBACK_ENABLE UA4_MCR_LOOP /* ** Line Status Register */ -#define UA4_LSR (UA4_PORT+5) -# define UA4_LINE_STATUS UA4_LSR +#define UA4_LSR (UA4_PORT + 5) +#define UA4_LINE_STATUS UA4_LSR -#define UA4_LSR_RXDA 0x01 // Receiver Data Available -#define UA4_LSR_OE 0x02 // Overrun Error -#define UA4_LSR_PE 0x04 // Parity Error -#define UA4_LSR_FE 0x08 // Framing Error -#define UA4_LSR_BRK 0x10 // Break Event Detected -#define UA4_LSR_TXRDY 0x20 // Transmitter Ready -#define UA4_LSR_TXEMP 0x40 // Transmitter Empty -#define UA4_LSR_ER_INF 0x80 // Error in RX_FIFO +#define UA4_LSR_RXDA 0x01 // Receiver Data Available +#define UA4_LSR_OE 0x02 // Overrun Error +#define UA4_LSR_PE 0x04 // Parity Error +#define UA4_LSR_FE 0x08 // Framing Error +#define UA4_LSR_BRK 0x10 // Break Event Detected +#define UA4_LSR_TXRDY 0x20 // Transmitter Ready +#define UA4_LSR_TXEMP 0x40 // Transmitter Empty +#define UA4_LSR_ER_INF 0x80 // Error in RX_FIFO // aliases -#define UA4_LSR_RX_DATA_AVAILABLE UA4_LSR_RXDA -#define UA4_LSR_OVERRUN_ERROR UA4_LSR_OE -#define UA4_LSR_PARITY_ERROR UA4_LSR_PE -#define UA4_LSR_FRAMING_ERROR UA4_LSR_FE -#define UA4_LSR_BREAK_DETECTED UA4_LSR_BRK -#define UA4_LSR_TX_READY UA4_LSR_TXRDY -#define UA4_LSR_TX_EMPTY UA4_LSR_TXEMP -#define UA4_LSR_RX_FIFO_ERROR UA4_LSR_ER_INF +#define UA4_LSR_RX_DATA_AVAILABLE UA4_LSR_RXDA +#define UA4_LSR_OVERRUN_ERROR UA4_LSR_OE +#define UA4_LSR_PARITY_ERROR UA4_LSR_PE +#define UA4_LSR_FRAMING_ERROR UA4_LSR_FE +#define UA4_LSR_BREAK_DETECTED UA4_LSR_BRK +#define UA4_LSR_TX_READY UA4_LSR_TXRDY +#define UA4_LSR_TX_EMPTY UA4_LSR_TXEMP +#define UA4_LSR_RX_FIFO_ERROR UA4_LSR_ER_INF /* ** Modem Status Register */ -#define UA4_MSR (UA4_PORT+6) -# define UA4_MODEM_STATUS UA4_MSR +#define UA4_MSR (UA4_PORT + 6) +#define UA4_MODEM_STATUS UA4_MSR -#define UA4_MSR_DCTS 0x01 // Delta Clear to Send -#define UA4_MSR_DDSR 0x02 // Delta Data Set Ready -#define UA4_MSR_TERI 0x04 // Trailing Edge Ring Indicate -#define UA4_MSR_DDCD 0x08 // Delta Data Carrier Detect -#define UA4_MSR_CTS 0x10 // Clear to Send -#define UA4_MSR_DSR 0x20 // Data Set Ready -#define UA4_MSR_RI 0x40 // Ring Indicate -#define UA4_MSR_DCD 0x80 // Data Carrier Detect +#define UA4_MSR_DCTS 0x01 // Delta Clear to Send +#define UA4_MSR_DDSR 0x02 // Delta Data Set Ready +#define UA4_MSR_TERI 0x04 // Trailing Edge Ring Indicate +#define UA4_MSR_DDCD 0x08 // Delta Data Carrier Detect +#define UA4_MSR_CTS 0x10 // Clear to Send +#define UA4_MSR_DSR 0x20 // Data Set Ready +#define UA4_MSR_RI 0x40 // Ring Indicate +#define UA4_MSR_DCD 0x80 // Data Carrier Detect // aliases -#define UA4_MSR_DELTA_CLEAR_TO_SEND UA4_MSR_DCTS -#define UA4_MSR_DELTA_DATA_SET_READY UA4_MSR_DDSR -#define UA4_MSR_TRAILING_EDGE_RING UA4_MSR_TERI -#define UA4_MSR_DELTA_DATA_CARRIER_DETECT UA4_MSR_DDCD -#define UA4_MSR_CLEAR_TO_SEND UA4_MSR_CTS -#define UA4_MSR_DATA_SET_READY UA4_MSR_DSR -#define UA4_MSR_RING_INDICATE UA4_MSR_RI -#define UA4_MSR_DATA_CARRIER_DETECT UA4_MSR_DCD +#define UA4_MSR_DELTA_CLEAR_TO_SEND UA4_MSR_DCTS +#define UA4_MSR_DELTA_DATA_SET_READY UA4_MSR_DDSR +#define UA4_MSR_TRAILING_EDGE_RING UA4_MSR_TERI +#define UA4_MSR_DELTA_DATA_CARRIER_DETECT UA4_MSR_DDCD +#define UA4_MSR_CLEAR_TO_SEND UA4_MSR_CTS +#define UA4_MSR_DATA_SET_READY UA4_MSR_DSR +#define UA4_MSR_RING_INDICATE UA4_MSR_RI +#define UA4_MSR_DATA_CARRIER_DETECT UA4_MSR_DCD /* ** Scratch Register @@ -343,7 +343,7 @@ ** Not used by the UART; usable as a "scratchpad" register for ** temporary storage. */ -#define UA4_SCR (UA4_PORT+7) -# define UA4_SCRATCH UA4_UA5_SCR +#define UA4_SCR (UA4_PORT + 7) +#define UA4_SCRATCH UA4_UA5_SCR -#endif /* uart.h */ +#endif /* uart.h */ |